What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 22.06.2025 01:19
For this case there are devices called Metal oxide varistors (MOV).
what exactly is a ‘surge’ protector?
But… the neutral is now “floating” because of the 1 ohm resistance.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
An AC voltage/ current source, and an ac inductive load.
One is “what exactly is in a ‘surge protector’ ? ”
At least they know the answer if they wanted it.
He then asserts :
AMD once again first to top GPU clock charts with RX 9060 XT delivering 3.1 GHz - VideoCardz.com
This is the picture of an electronic coil of wire wound around a core of magnetic material.
The bolt then partially travels down the line to your home.
It also is a device that limits the change in current flow.
Hubble Trouble Solved? Webb Telescope Finally Cracks the Universe’s Growth Mystery - SciTechDaily
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
In schematic diagrams this is the symbol for a fuse:
There are three different concepts here that are getting confused.
2024–10–10[John johnson John Johnson ]
He then describes Rainy Season and Lightning.
A fuse is a non-resetable over current circuit protector.
How or what is the best way to make a hot rail device? Anddd goooo 👀👀
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
There are two important concepts here.
He then describes the function of a fuse.
How many trans people are lawful gun owners?
so, what happens?
These devices are installed between the “hot” and “neutral” and protective ground.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Apple’s Craig Federighi on the long road to the iPad’s Mac-like multitasking - Ars Technica
2024–10–16 [ OO OLAOYE OYEBODE ]
(Dc diagram shown, AC is similar).
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Europe cuts interest rates as Trump's tariffs loom - BBC
What is lightning?
2024–10–14 [Omar Gharbi Omar Gharbi ]
The third is lightning and “how it gets conducted into a home.”
I post the exact comment here.
Because the load is inductive, the current lags the voltage.(by a bit).
[image of Common-mode choke]
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
2 new measles cases confirmed in Colorado - 9News
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
the problem then depends on "how fast does the fuse operate?".
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
The Universe's Missing Black Holes May Have Been Located - ScienceAlert
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
This one hit behind the barn.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
So, the voltage could go up to 500 volts, and the fuse will not open up.
The MOV will conduct when the voltage exceeds 50% of line voltage.
[old diagram got deleted by accident]
This is where this question deviates from being a 'generic' question, and becomes more specific.
It seems Mohan does not understand the difference between a comment and an Answer.
Edit 2024–10.
Upvotes:
This is 'the assistant's answer'
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Here is a simplified AC power diagram.
This is where the MOV conducts again, and dissipated the energy.
The other is “what does a “fuse” do?”
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
At one ohm, the resistor has a maximum of 1 watt power.
One
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
but this device (an Inductor) … impedes the rapid changes in the current.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
eight
First Sentence:
Now when you have a certain ac resistance, then a current flows in a loop.
Barnstars:
A circuit breaker is similar, but is resettable.
But it can get overloaded, and no longer works.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
This device then solves the entire problem.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
a photo is worth a thousand words.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
What does a fuse do?
but I think this circuit , shows a few more pieces.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
These are simplified answers to the original question, and does not change anything I wrote above.
nine